Solid hardwood flooring vs. engineered flooring

//Solid hardwood flooring vs. engineered flooring
Solid hardwood flooring vs. engineered flooring 2018-07-09T15:30:13-05:00

The most commonly asked question asked by folks thinking about installing  a new hardwood floor is the difference between solid and engineered hardwood flooring.  We have tried to break it down for you in the six areas that we find are most important in the decision making process for our customers.

Solid versus Engineered Hardwood Flooring


Solid hardwood flooring can generally be refinished many times because it can be sanded and re-sanded nearly all the way down to the tongue and groove of the boards. That could be as much as 1/4” or about one third of the thickness of the board and believe me, that’s a lot of sanding. But, most engineered floors can be sanded too, especially if you choose one with a thicker saw cut face. As a practical matter, for most residential uses,  the new factory finishes are so durable that you will get a lifetime of carefree use before a new finish is ever needed. Refinishing, therefore usually becomes a secondary consideration in the selection process.


Versatility is always an important issue in choosing flooring. Today, engineered hardwood flooring is really quite versatile. It can be installed using either glue or staples, and as a result of recent developments in locking systems, now it can even “float”. It can also be installed over all types of sub-floors from suspended wood to concrete slab. Engineered hardwood flooring, given proper conditions, can be used below grade. Solid hardwood flooring, on the other hand, has the limiting requirement of needing to be stapled down over suspended floors – above grade. In order to fasten solid hardwood flooring over a concrete floor, plywood or firing strips would have to be installed first. It can be done, but it is time consuming and expensive.


Engineered hardwood flooring is generally thinner than solid hardwood. That means it can be used in many remodeling projects where a solid 3/4 inch solid floor would create a height problem. Engineered floors range in thickness from 1/4 inch to 3/4 inch


For the most part, hardwood flooring is quite dimensionally stable over time. Solid hardwood may, under certain climatic conditions, be subject to swelling or shrinking. Engineered hardwood flooring, on the other hand while still subject to slight movement is the better choice where extreme seasonal climate changes may cause problems. The plywood-like construction of an engineered floor gives it more dimensional stability.


Typically engineered hardwood flooring will cost you less than solid hardwood flooring for the same look because less of the valuable tree is used than with solid wood. Also, freight costs are lower because engineered flooring is lighter in weight and therefore less costly to transport. These factors also help make engineered flooring friendly to the environment.


If there is no limit to your imagination and no limit to your pocket book, then there is no limit to the variety of beautiful floors that can be created from custom patterns, imported exotic species and fine finishes. Some of the most expensive custom floors around the world are made from combinations of solid hardwood species, usually 3/4” thick. Solid hardwood floors do a better job of minimizing “bounce” over suspended floors. They convey a lasting sense of value and permanence to your home.
Please take a few moments to check some of our customer testimonials and then get in touch with us for a estimate on your hardwood flooring needs or to meet with one of our design consultants to custom design your new floor. You can visit us at our Newark, DE Showroom or we can come to you.

In PA Call – (610) 631-3200 In DE Call – (302) 731-8009 or complete our Contact Form.

| Showroom | Residential Services | Commercial Services | Customer Reviews | Map & Directions |